Janome 1/4 Inch Ruler Foot for 9mm and 7mm High Shank Models

The Janome 1/4 Inch Ruler Foot for 9mm and 7mm High Shank Models was specifically designed to use for ruler work using Janome quilting rulers. The ¼” cup height moves smoothly alongside the quilting ruler without allowing the ruler to slide over or under. With this foot, the needle drops a ¼ inch away from the ruler to create the quilting line.

Features of the Janome 1/4 Inch Ruler Foot for 9mm and 7mm High Shank Models

Adjustable Presser Foot Height
Easily adjust the height of the foot to match your fabric’s by turning the round nut
located on the foot.

V-Shaped Front and Side
The V-shaped gaps in the foot greatly improve visibility even when
sewing side on.

Marks on the Foot
Marks on the foot can be used to determine the center point of the foot, helping to
create accurate ruler work designs!

Compatible with Janome High Shank models with 9mm and 7mm maximum width.

This accessory works with the following models:

• Memory Craft 6650
• Memory Craft 6700P
• Memory Craft 9850
• Memory Craft 9900
• Skyline S5
• MC5000, MC5700, MC8000, MC8100HF, MC9000, MC9500, MC9700, MC10000, MC10001, MC11000, MC6600P, MC7700QCP, MC12000 Horizon, 6600P, MC12000 Horizon, 6600P, MC14000, MC15000

Feel free to email or call us if you have questions if this item will work with your machine