Floriani Press N Bond Ultra 10 Inch x 10 Yards

$37.49
In stock
Only 2 left
SKU
33173
Double Sided Adhesive
Use the Floriani Press N Bond as a "no sew" bonding material to adhere patches, appliqués and embroideries to most fabrics without stitching. Floriani Press N Bond withstands laundering and dry cleaning and will create a permanent bond between fabric surfaces when heat is applied. Using the Floriani Press N Bond no sewing is required. Floriani Press N Bond Adheres to Vinyl, Polyester, Cotton, Polycotton and most other fabrics.
 

Use this transparent "no sews" bonding material to adhere patches, appliqués and embroideries to most fabrics without stitching!

Press N Bond® Ultra withstands laundering and dry cleaning and will create a permanent bond between fabric surfaces when heat is applied. NO sewing is required! Press N Bond® Ultra adheres to Vinyl, Polyester, Cotton, Polycotton and most other fabrics. Testing is always recommended to ensure the fabric or textile is compatible.

Designed to work with :
• Digital & Laser Cutters
• Printable with Inkjet Printers

 
Sizes Available: FPNBU - 10” x 10 yds

Application Instructions for Household Iron:
• Preheat iron to Cotton setting. Steam is not needed.
• Cut Floriani Press N Bond Ultra sheet slightly smaller than fabric.
• Place the Floriani Press N Bold Ultra on flat ironing surface with the shiny side facing up. The backing sheet (printed Place This Side Down) should be facing the ironing surface.
• Place fabric over Florian Press N Bond Ultra. Press iron straight down and hold for approximately 10-15 seconds to anchor fabric to adhesive. Move the iron back and forth over entire fabric surface to bond layers together.
• Turn over the fused layers and iron again from paper backing side. Use of a press cloth is recommended to prevent the possibility of transferring printing to fabric.
• Let fused fabric & Floriani Press N Bond Ultra cool completely. Cut using preferred method .
• Remove the white Floriani Press n Bond Ultra backing sheet.
• Place the fused element on base fabric, adhesive side of the element over the base fabric. Press for approx 10-12 seconds.

Heat Press Instructions:
• Temperature setting: 345 degrees Fahrenheit
• Pressure setting: medium
• Place Floriani Press N Bond Ultra backing side down, exposed adhesive facing up. Place fabric wrong side to Press N Bold Ultra adhesive. Press for Seconds. Remove from press, let cool completely. Cut using preferred method.
• Remove the white Floriani Press n Bond Ultra backing sheet.
• Place the fused element on base fabric, adhesive side of the element over the base fabric. Press for 8-10 seconds.

More Information
SKU 33173
UPC 844050023790
Part Number FPNBU
Condition New
Minimum Advertised Price $0.00
Copyright © Ken's Sewing Center. All rights reserved.