Baby Lock Serger Beading Foot for 8 Thread Models

Baby Lock Serger Beading Foot for 8 Thread Models - Beading Foot (BLE8-BF) Serge pearls, piping, cording, and more to the edge of fabric with ease and speed. This Baby Lock Serger Beading Foot for 8 Thread Models will give all your surface embellishments a professional finish.

MACHINE SETTINGS
Stitch type: 3-Thread Rolled Hem
Stitch selector: D
Needle: 02
Stitch width: M
Stitch length: 3-4 Rolled Hem
Upper knife: Engaged “UNLOCKED”
Differential feed: N-0.6
Sewing speed: Slow to moderate speed

1. Remove the left needle from the machine. Set machine to
narrow rolled hem (Refer to your instruction manual for
details).
2. Replace the standard presser foot with the beading foot.
3. Set stitch length setting at 3-4 mm according to the size of
beads used.
4. Position beads into beading foot as illustrated below.
5. Place edge of fabric you are attaching the beads to under
the presser foot, lower presser foot, and stitch.

NOTE: It is recommended to sew a test sample before
sewing your actual garment to determine the correct stitch
length.

Compatible with Babylock serger models:

BLETS8 Triumph, Euphoria BLC4, Evolution BLE8W-2, Evolve BLE8, Evolve BLE8W, Ovation BLES8